home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 20 / Cream of the Crop 20 (Terry Blount) (1996).iso / faq / atw15.zip / TJHELP.TXT < prev    next >
Text File  |  1996-05-29  |  20KB  |  525 lines

  1.  
  2.                     TIPS AND TRICKS FROM T&J SOFTWARE
  3.                     Revised: 10/11/1995
  4.  
  5.  
  6. Section I       - Display Problems
  7. Section II      - DigiBoards & Fossil Drivers
  8. Section III     - Overflow Errors
  9. Section IV      - Miscellaneous Errors
  10.  
  11.  
  12.  
  13. ──────────────────────────────────────────────────────────────────────────────
  14.                        SECTION I - DISPLAY PROBLEMS
  15. ──────────────────────────────────────────────────────────────────────────────
  16.  
  17.  
  18.  
  19.  
  20. ANSI Control Codes on the LOCAL monitor:
  21. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  22. If you encounter screen fulls of garbage on the local monitor when
  23. running a T&J Software Door, please follow these simple directions:
  24.  
  25. NOT RUNNING DESQVIEW
  26. ~~~~~~~~~~~~~~~~~~~~
  27. If you are not running DESQview, you need to add ANSI.SYS to you
  28. CONFIG.SYS file. Do the following:
  29.  
  30. 1. Add this line to your CONFIG.SYS file (placement is not important).
  31.    DEVICE=C:\DOS\ANSI.SYS
  32.  
  33. 2. Reboot the machine.
  34.  
  35. RUNNING DESQVIEW
  36. ~~~~~~~~~~~~~~~~
  37. If you are running DESQview, you need to run DVANSI.COM in EACH node
  38. batch file. DVANSI.COM can be found in your DESQview directory. Here's
  39. an example of my CAT1.BAT file:
  40.  
  41. @echo off
  42. :cat
  43. cd\dv
  44. dvansi
  45. SET WCNODEID=1
  46. SET WCPORTID=2
  47. SET WCIRQID=3
  48. CD \Wildcat
  49. WILDCAT
  50. if exist c:\wildcat\wcwork\node1\event.bat c:\wildcat\wcwork\node1\event.bat
  51. if exist c:\wildcat\wcwork\node1\dropdos.bat c:\wildcat\wcwork\node1\dropdos.bat
  52. if exist c:\wildcat\wcwork\node1\door.bat c:\wildcat\wcwork\node1\door.bat
  53. if exist c:\wildcat\wcwork\node1\postcall.run c:\wildcat\wcwork\node1\postcall.bat
  54. IF ERRORLEVEL 1 GOTO CAT
  55. REM END
  56. atsend z 2
  57.  
  58. Note line 3 and 4. That's all you need to do!
  59.  
  60. ANSI under OS/2 (prepared by Mark Ingenito) - Thanks!
  61. ~~~~~~~~~~~~~~~
  62. OS/2 does not automatically install ANSI support. However, it's
  63. easy enough to add this support, and you can find what you need
  64. to accomplish this in your \OS2\MDOS directory. You need just
  65. one file - ANSI.SYS.
  66.  
  67. There are two methods you can install ANSI.SYS on your OS/2
  68. system:
  69.  
  70.  1. This method will enable ANSI support for this particular DOS
  71.     session ONLY:
  72.  
  73.   - On your desktop, right click on the DOS session icon you're
  74.     using for your BBS node.
  75.   - Left Click on SETTINGS
  76.   - Left Click on SESSION tab
  77.   - Left Click on DOS SETTINGS
  78.   - Left Click on ALL DOS SETTINGS
  79.   - Left Click or move highlight bar to DOS_DEVICE
  80.   - In the text box that will appear to the right, type the
  81.     following:
  82.  
  83.     "x:\os2\mdos\ansi.sys", without the quote marks, where "x:" is the
  84.                             drive where OS/2 resides.
  85.  
  86.   - Now, Left Click on SAVE button at bottom of window, ALT-F4 to close
  87.     settings box. Now, when you open this DOS session, you will have ANSI
  88.     support! By the way, a reboot is NOT necessary when using this method
  89.     of adding MDOS device drivers.
  90.  
  91.  
  92.  2. This method will enable ANSI support in ALL DOS sessions:
  93.  
  94.   - From your desktop, Double-Left Click on OS/2 SYSTEM icon.
  95.   - Double-Left Click on PRODUCTIVITY
  96.   - Double-Left Click on ENHANCED EDITOR.(You can use any OS/2
  97.     editor you wish, actually)
  98.   - Open your CONFIG.SYS file and page down to the section of the file that
  99.     contains the device driver lines for DOS sessions. These lines normally
  100.     begin with and follow the line "SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS".
  101.   - Insert the line "DEVICE=C:\OS2\MDOS\ANSI.SYS", without the quotes, on the
  102.     next line following the SHELL= statement.
  103.   - SAVE your changes.
  104.   - Close your editor.
  105.  
  106.     You will now need to perform a SHUTDOWN and reboot your system for
  107.     this change to take effect.
  108.  
  109. Garbled Information on Remote
  110. =============================
  111. * If the door seems to operate fine on the BBS end but the remote
  112.   cannot receive or receives garbled information, check and make sure
  113.   you are passing the correct IRQ to the door (if you are running a
  114.   non standard IRQ).
  115.  
  116. TRIBBS v5.02+
  117. =============
  118. * Color ANSI checking will not work if you use TRIBBS.SYS drop file.
  119.   Set the doors up using the PCBOARD.SYS drop file.
  120.  
  121. Graphic Cards (general)
  122. =======================
  123. * ATI Graphics Ultra Pro card - do not use the ANSI.SYS driver that
  124.   came with the card. Use the normal DOS ANSI.SYS for the screens
  125.   to show correctly.
  126.  
  127. * Trident SVGA Cards - You should have a utility disk with a file
  128.   called TANSI.SYS, use this ansi driver instead of the standard
  129.   ANSI.SYS.
  130.  
  131.  
  132.  
  133.  
  134. ──────────────────────────────────────────────────────────────────────────────
  135.                 SECTION II - DIGIBOARDS & FOSSIL DRIVERS
  136. ──────────────────────────────────────────────────────────────────────────────
  137.  
  138.  
  139.  
  140.  
  141. SearchLight BBS and DigiBoards
  142. ==============================
  143. To set up on a SLBBS with a DIgiboard....
  144.                     
  145.                     E D I T   C O M M A N D
  146.  
  147.                 Press F1 to Change Command Type
  148.   1. Command Name .................. STUD's
  149.   2. Command Key ................... U
  150.   3. Description ................... Become the alltime STUD on the board
  151.   4. Event Logging ................. No
  152.   5. Access Levels & Graphics [...]
  153.   6. Door Command .................. c:\slbbs\door\stud\studs.bat %O
  154.   7. Directory Path ................ .
  155.   8. Communications Support ........ Fossil
  156.   9. Abort Method .................. None
  157.  10. Write Protection .............. No
  158.  11. Parameter File ................ DOOR.SYS
  159.  12. Pause After Door .............. No
  160.  13. Pass Username As .............. Login Name
  161.  14. Pass COM Port As .............. COM1-COM4
  162.  
  163. REM  ( DFTSR loads in your AUTOEXEC.BAT no other subcommands needed with it, 
  164. REM  as long as your Digiboard 4, 8 or 16 starts at 0 for the first channel.)
  165.  
  166. DFTSR
  167.                This is for multi-node Node 1 below.....
  168.  
  169. REM ( Batch file called out from BBS door with Node command %O for SLBBS.)
  170. @ECHO OFF
  171. c:
  172. cd \slbbs\door\stud
  173. stud%1.bat
  174. REM ( this would be STUD1.BAT )
  175. DF FOSSIL-LOCK 12     (turns fossil driver on at channel 12)
  176. c:
  177. CD \slbbs\DOOR\STUD
  178. STUDS! studs1.cfg /FD
  179. DF DIGI 12            (turns fossil off so it can return to the DIGIBOARD)
  180. c:
  181. cd \slbbs1
  182.  
  183. REM  ( This would be STUDS1.CFG )
  184. C:\SLBBS1\DOOR.SYS
  185. The Bart Stop BBS
  186. Bartman
  187. S.
  188.  
  189. DigiFossil Information
  190. ======================
  191.  
  192.                         DIGIFOSSIL V2.2 - Jun 6, 1995
  193.                         FOSSIL Driver for Digi-Boards
  194.                         & DIGIBOARD Driver for FOSSIL
  195.                         =============================
  196.                                               Technique Computer Systems
  197.                                               Victoria, BC  CANADA
  198.                                               BBS: (604) 361-1541
  199.                                               FAX: (604) 361-4789
  200.                                             email: scott@plywood.bcbbs.net
  201.  
  202.   What is DIGIFOSSIL?
  203.   -------------------
  204.   DIGIFOSSIL is the program (DFTSR) you need  in order to get a huge number
  205.   of applications written for  FOSSIL systems working on  your BBS, if your
  206.   BBS uses  an intelligent  Digiboard (such as  the PC/Xe,  PC/Xi or COM/Xi
  207.   series).  (if you need a FOSSIL for a nonDigiboard system, try either X00
  208.   or BNU, which are available from many BBSs).
  209.  
  210.   DIGIFOSSIL also  includes a program  (FDTSR) to run  your Digiboard based
  211.   BBS on a non-digiboard (FOSSIL) setup.   This allows you to use a product
  212.   such as Wildcat! IM (where they haven't implemented FOSSIL support).
  213.  
  214.   Legal Stuff
  215.   -----------
  216.   DIGIFOSSIL is Copyright 1992-1995, Technique Computer Systems, all rights
  217.   reserved.  This product is provided "AS-IS" without warranty of any kind.
  218.  
  219. RENEGADE BBS
  220. ============
  221. * If you are using BNU fossil driver and having problems with the
  222.   doors, try using X00 v1.50+. Several Renegade systems have reported
  223.   problems using BNU with the doors.
  224.  
  225. WILDCAT
  226. =======
  227. * Wildcat! IM Version Setup using DigiFossil v2.x:
  228.  
  229.   All of our doors will run on the Wildcat! IM version using DigiFos
  230.   v2.x. I have received TWO different setup routines concerning the
  231.   IM version, here's an example:
  232.  
  233.   DF